3 1/2 Digit Process Receiver, Transmitter & Controller

3 1/2 DIGIT PROCESS RECEIVER, TRANSMITTER & CONTROLLER
Q2000P Process Receiver
Q2000E Process receiver w/excitation output

1/8 DIN (1A) Case

Connections Diagram

QUANTA STANDARD FEATURES
10 or 15 V dc excitation output (Q2000E)
±1,999-count display span
Selectable current ranges from ±1 to ±50 mA
Selectable voltage ranges from ±0.5 to ±20 V
Built-in shunts and attenuators
Zero adjustment to ±100% of readout
Standard signal ranges of 4-20 mA, 10-50 mA, 1-5 V or 0-10 V
Front-panel accessible fine-zero and fine-span adjustments
1 mV/count analog output
LED or LCD display
Automatic polarity
Display hold and test
120/240 V ac, 5 V dc, 9-32 V dc or 26-56 V dc power
Screw-terminal barrier strip
1/8 DIN case

OPTIONS
Analog output for user-selected span
Single-setpoint 10 A relay control
Dual-setpoint 10 A relay control
Proportional 4-20 mA control
Time-proportional 2 A solid-state relay control
Parallel BCD output, isolated
NEMA-4 splash-proof lens cover

The Q2000P is a 3 1/2 digit process receiver with extensive zero and span adjustment capability for readout in engineering units. The more popular process signals are 4-20 mA, 10-50 mA, 1-5 V and 0-10 V. The Q2000P can also be scaled for other signal levels. Full-scale input ranges are selectable from ±1 to ±50 mA (current signal) or ±0.5 to ±20 V (voltage signal). Zero is adjustable up to ±100% of full-scale readout for every input range.

The Q2000E is an enhanced version of the Q2000P with an excitation output for powering transmitters and active transducers. In many cases, this output can eliminate the need for a more expensive external supply. The output shares the ground of the signal input. Two output levels are jumper-selectable: 10 V dc at up to 50 mA and 15 V dc at up to 25mA.

CONFIGURATION AND CALIBRATION
The price of the Q2000P and Q2000E includes configura- tion and calibration, normally provided by an authorized Newport distributor. Both models can also be configured and scaled in the field. Full-scale signal, coarse-span and coarse-zero ranges are selected by plug-in jumpers. A complete set of internal shunts and attenuators are already on board. Fine-zero and fine-span potentiometers are accessible behind the lens to allow final calibration or field recalibration without removal of the panel meter.

POWER AND DISPLAY OPTIONS
Six types of meter power are available: 120 V ac, 240 V ac, 24 V ac, 5 V dc, isolated 9-32 V dc and isolated 26-56 V dc. An LED display is standard. An LCD display is avail- able and is useful for viewing in bright ambient light.

ANALOG OUTPUT OPTIONS
A 1 mV/count (±2 V full-scale) analog output is standard and is ideal for driving a strip-chart recorder. An additional analog output can be provided by an optional vertical plug-in board. Available output signals are 0-5 V dc, 0-10 V dc, 0-1 mA (source or sink), and 4-20 mA (source or sink). The top and bottom of each output range can be scaled to fit a user-selected display span.

CONTROL OUTPUT OPTIONS
Additional outputs can be provided by a horizontal upper board. Available options include single-setpoint control with one 10 A relay, dual-setpoint control with two 10 A relays, 4-20 mA proportional control (source or sink), time-proportional 2 A solid-state relay control, and isolated, parallel BCD output. For additional information, please refer to the QUANTA and Mechanical sections.

SPECIFICATIONS

ANALOG INPUT

VOLTAGE RECEIVER	Most-sensitive scaling	Least-sensitive scaling
Signal range	±0.5 V	±20 V
Display range	±1,999 counts	±1,999 counts
Resolution	250 µV/count	10 mV/count
Input resistance	100 kohm	1.0 Mohm
Bias current	100 pA	13 pA
Maximum voltage	250 Vp	250 Vp

CURRENT RECEIVER	Most-sensitive scaling	Least-sensitive scaling
Signal range	±1.0 mA	±50.0 mA
Display range	±1,999 counts	±1,999 counts
Resolution	500 nA/count	25µA/count
Input resistance	500 ohm	10 ohm
Voltage drop, max	±0.5 V	±0.5 V

VOLTAGE & CURRENT RECEIVER
Full-scale signal input: Six jumper-selectable ranges
Coarse-span adjustment: Four jumper-selectable ranges
Fine-span adjustment: Front-panel potentiometer
Coarse-zero adjustment: Four jumper-selectable ranges
Fine-zero adjustment: Front-panel potentiometer
Input configuration: Single-ended

NOISE REJECTION
NMR, SIG HI to SIG LO: 75 dB, 50/60 Hz
CMR, SIG GND to PWR GND: 120 dB
CMV, SIG GND to PWR GND: 1500 Vp per HV test, 354 Vp per IEC spacing

ACCURACY AT 25°C
Error, max: ±0.05% of reading ±1 count
Span tempco: ±0.01% of reading/°C
Zero drift, max: ±0.01% of reading/°C
Offset drift, max: ±(0.01% offset V ±0.01% FS V)/°C
Step response: 1 s to 99.9% of span
Warmup to rated accuracy: 10 min

ANALOG-TO-DIGITAL CONVERSION
Technique: Dual-slope, average-value
Signal integration period: 100 ms
Read rate: 2.5/s

TRANSMITTER EXCITATION SUPPLY (Q2000E)
Output voltage: 10 or 15 V dc, jumper-selectable
Output current, max: 50 mA at 10 V dc, 25 mA at 15 V dc, 50 mA for sum for all output currents, including control output and analog output
Line regulation, max: ±0.2% for 10% change of AC line power voltage
Load regulation, max: ±0.5% from zero to max load
Ripple at 50/60 Hz: ±0.01%

DISPLAY
LED: 0.56 in (14.2 mm) 7-segment, red
LCD: 0.50 in (12.7 mm) 7-segment liquid crystal
Symbols: 1.8.8.8
Decimal point positions: Three positions selectable by jumpers behind lens or at connector
Overrange indication: Three-least significant digits blanked

POWER
AC voltages: 120, 240 or 24 V ac +10%/15%
AC frequency: 49-440 Hz
DC voltages: 9-32 V dc, isolated to 300 Vp; 26-56 V dc, isolated to 300 Vp; 5 V dc ±5%, non-isolated
Power consumption: 5 W max

ENVIRONMENTAL
Operating temperature: 0 to 60°C
Storage temperature: 40 to +85°C
Relative humidity: 95% at 40°C (non-condensing)

MECHANICAL
Dimensions: Newport DIN1A (1/8 DIN) case (see Mechanical section for drawings)
Weight: 17 oz (480 g)
Case material: 94V-0 UL-rated polycarbonate